- Should I get a resin or filament 3d printer?
- How long does a resin printer take?
- How much is a resin printer?
- Can you mix different resins?
- Do resin printers need ventilation?
- Does 3d printing produce fumes?
- Is a resin 3d printer better?
- Can you mix 3d printer resin?
- Can you mix brands of resin?
- How much resin do I need for 3d printing?
- Do you need ventilation for a 3d printer?
- Are resin 3d printers toxic?
Should I get a resin or filament 3d printer?
It all depends on the kind of printing you want to do.
If you are hoping to print miniatures for board games, highly detailed models, or production quality parts, then an SLA/DLP printer is the best choice.
The level of resolution that a resin printer can bring is extraordinary..
How long does a resin printer take?
3D printing a part can take anywhere from 30 minutes to 7 days or more. There are a several factors that dictate how long it takes to 3d print a part. These include the overall size and geometry of the part as well as the 3D printing technology being used.
How much is a resin printer?
The average 3D printer material cost for standard SLA resins is approximately $50 per liter.
Can you mix different resins?
Yes, you can mix and match resin/hardeners from different brands, either wholly or partly. By this I mean (with some understanding) you can use one companies resin, with another’s hardener.
Do resin printers need ventilation?
It goes without saying that every 3D printer installation, regardless of whether it is resin, powder or filament, should have a ventilation solution. This would remove airborne particles and volatile organic compounds (VOCs) from the workshop.
Does 3d printing produce fumes?
3D printers can often run overnight or for long hours as it prints a model layer by layer. The longer the plastic melts, the higher the volume of fumes that get emitted in the process. Breathing-in the minute particles of plastic that are present in such fumes can be hazardous.
Is a resin 3d printer better?
Quality – A major consideration in 3D printing is the quality of objects that you will be printing. FDM printers rely on several factors, such as extruder precision, nozzle size and adhesion between layers. … When comparing finished products, resin 3D printing yields better final results.
Can you mix 3d printer resin?
Obviously, the liquid resin is a single material; if you put two different kinds of resins together in a tank they would mix together and results would be unpredictable, and likely messy. Therefore in all commercial resin 3D printers today we see mono-material printing only.
Can you mix brands of resin?
7) Mixing different brands: You cannot mix Pro Marine Resin or Hardener with any other brand. You might want to try if you had a little extra leftover but it will leave you with poor results. The best thing to do with extra resin or hardener is to store it until you order a new batch of Pro Marine Table Top Epoxy.
How much resin do I need for 3d printing?
Most people use their SLA printers to create small but highly detailed objects. A good example would be figures for a tabletop board game, each with a height of around 2.8 cm. or a little higher than an inch. With a 1-liter bottle of liquid resin, you can print between 120 to 140 of such figures.
Do you need ventilation for a 3d printer?
As for ABS, when 3D printing with it, the research shows that it produces both UP and VOCs which includes styrene. While not harmful in small portions, breathing in styrene on a regular basis can be harmful to the human body. Therefore, ventilation is needed anytime the 3D printing process is initiated.
Are resin 3d printers toxic?
Harmful when exposed to eyes or ingested: Never let resin near or into your eyes or mouth unless they’re specifically marked as non-toxic. … Standard resin for 3D printing isn’t rated eye or food-safe and can quickly cause permanent harm if exposed to these areas of your body.