Question: What Is Cable Rigging?

What is the purpose of rigging?

Rigging is the proper installation of airframe components (wings, ailerons and tail surfaces) designed to do a specific aerodynamic job and contribute to the aircraft’s overall performance, stability and safety..

What is aircraft rigging?

Rigging is the alignment of aircraft parts or sections to obtain proper flight characteristics. A certain amount of rigging is necessary during the assembly of an aircraft, but even after final assembly, certain rigging adjustments must be made.

How do you calculate tension in a cable?

The tension on an object is equal to the mass of the object x gravitational force plus/minus the mass x acceleration. Tension Formula Questions: 1) There is a 5 kg mass hanging from a rope.

What is the purpose of rigging pin?

Pins, usually called rig pins, are sometimes used to simplify the setting of pulleys, levers, bellcranks, etc., in their neutral positions.

How do you check aircraft cable tension?

When it has been determined that the aircraft is symmetrical and structural alignment is within specifications, the cable tension and control surface travel can be checked. To determine the amount of tension on a cable, a tensiometer is used. When properly maintained, a tensiometer is 98 percent accurate.

What is cable tension?

Cable tension is determined by measuring the amount of force needed to make an offset in the cable between two hardened steel blocks called anvils. A riser or plunger is pressed against the cable to form the offset.

What is rigging specification?

Rigging Specifications It lists the limitations and information required for type certification, including airspeed limits, weight limits, control surface movements, engine make and model, minimum crew, fuel type, thrust limits, rpm limits, etc., and the various components eligible for installation on the product.

What are rigging tools?

What is Rigging Equipment?Wire Rope Slings. Wire rope slings are available in a range of lifting capacities, providing users with a strong and flexible solution for performing lifting operations. … Polyester Webbing Slings. Our lifting slings are available in a range of different designs and weight specifications. … Chainslings. … Spreader Beams.

What does rigging mean?

1a : lines and chains used aboard a ship especially in working sail and supporting masts and spars. b : a similar network (as in theater scenery) used for support and manipulation. 2 : clothing.

Is tension in a rope always the same?

The tension in the rope is constant if its force does not have to be used to accelerate anything else, including itself. Therefore, if it has negligible mass and is held taut between two points, the tension will be considered constant throughout.

What is the purpose of a control cable?

Control cables are multi-conductor cables used in automation and instrumentation applications. Control cables can measure and regulate transmissions of automated processes. Control cables are often UL rated. Control cables typically are shielded with a foil shield, braid shield or combination of the two.