What Is Required On A Secondary Label?

Who is responsible for applying secondary labels on containers?

The responsibility for proper hazardous product labeling generally falls on the supplier of the product.

However, employers are responsible for making sure that hazardous products are labeled appropriately when coming into their workplace and maintained when being stored and used..

Who is responsible for putting workplace labels on controlled product?

Who is responsible for labelling? Suppliers are responsible for labelling WHMIS-controlled products that they provide to customers. Employers and sometimes employees are all responsible for labelling or relabelling products in the workplace, as directed in occupational health and safety legislation.

When should you place a label on a container?

OSHA requires that labels on incoming containers of hazardous materials must not be removed or defaced until the container is empty and rinsed. No product or chemical shall be accepted without an adequate identifying label. Original containers should be labeled with the date received and the date opened.

Do secondary containers need GHS labels?

Secondary containers can be exempt from GHS labels if specific conditions are met. Firstly, the chemicals transferred to the secondary container must be intended for immediate use. Secondly, they must be used by the employee who transferred the contents from the primary container.

Can a workplace label be written by hand?

A workplace label may also be any size, format or colour. It can be typed or hand-written, as long as it has the 3 pieces of information.

What types of containers are considered secondary containers that Pamela will need to label?

What types of containers are considered “secondary” containers that Pamela will need to label? spray bottles, automatic x-ray films, chemical vapor sterilizers.

Is a bag considered a container for labeling purposes?

You should read both the container label and the SDS so that you will know the health hazards and PPE requirements. … A bag is not considered a container for labeling purposes.

Why is it important to label containers?

Chemical Labeling is an important component of an effective Hazard Communication Program. Clear and consistent labeling throughout your facility will ensure that chemical hazards are easily distinguishable and understood by employees.

What are the minimum labeling requirements for labeling small containers?

Minimum Label InformationProduct identifier.Appropriate pictograms.Manufacturer’s name and phone number.Signal word.A statement indicating the full label information for the chemical is provided on the outside package.

What information is required on a chemical label?

All labels are required to have pictograms, a signal word, hazard and precautionary statements, the product identifier, and supplier identification. A sample revised HCS label, identifying the required label elements, is shown on the right. Supplemental information can also be provided on the label as needed.

When must secondary containers be labeled?

Except for a few cases, secondary containers must be labeled. IF IN DOUBT, LABEL IT! One common case where you do not have to label a secondary container is if the container is portable and will be used immediately by the person who transferred the chemical into that container.

What types of containers are considered secondary containers?

Secondary (Workplace) container labels are found on employer containers, such as a smaller container used to store a chemical. For example, a spray bottle containing a chemical used during a manufacturing process would be a secondary container. Stationary container labels are typically found on large, fixed tanks.

What are the three standardized label components on a container label?

All labels are required to have pictograms, a signal word, hazard and precautionary statements, the product identifier, and supplier identification.

What two signal words can be on a label?

There are only two words used as signal words, “Danger” and “Warning.” Within a specific hazard class, “Danger” is used for the more severe hazards and “Warning” is used for the less severe hazards. There will only be one signal word on the label no matter how many hazards a chemical may have.

What has to be on a GHS label?

For instance, all shipped hazardous chemical containers must be labeled with a signal word, pictogram, hazard statement, and a precautionary statement for each hazard class and category. These requirements impact chemical manufacturers, importers, and distributors.

How do you fill out a chemical label?

u Safety Data Sheet (SDS) and u label; uor call the product manufacturer.To fill out the HMIS label:➊ Clearly print the product name under.➋ Check either the Warning or Danger signal.➌ Insert a number (found on the SDS)➍ Insert a number between 0 and 4 in the red.➏ Check the white box that says Personal.More items…

How do you label hazardous materials?

Labels must appear in their entirety and should not be placed near any other markings on the surface. They should always be visible, so never place them on the bottom of a container. If the waste has multiple hazards associated with it multiple labels should be displayed next to each other.

What do you do if a chemical container is missing a label?

If you identify containers where the labels are missing or defaced, you must immediately replace them. Employers should consider the benefits of a chemical management software platform that enables fast, easy printing of workplace labels that replicate the shipped label for most of your containers.

What is required on a secondary container label?

This label must contain two key pieces of information: the identity of the hazardous chemical(s) in the container (e.g., chemical name) and the hazards present. There are many ways to communicate this hazard information. Employers should select a system that will work for each location.

What are the three things required on a workplace label?

In general, a workplace label will require the following information:Product name (matching the SDS product name).Safe handling precautions, may include pictograms or other supplier label information.A reference to the SDS (if available).

How do I make my own product labels?

Create Your Own Personalized LabelsStep 1: Go Online. Open Avery Design & Print Online.Step 2: Enter Your Product Number. … Step 3: Choose Your Template. … Step 4: Personalize Your Labels. … Step 5: Apply the Design to Individual Labels, or to All. … Step 6: Preview & Print. … Step 7: Save. … Step 8: Continue to Create.